Disc magnet self-adhesive Ø 10 mm, height 1 mm

Neodymium, N35, nickel-plated

Article ID	S-10-01-STIC
Strength	approx. 540 g
UoS	20 Piece

Similar products
Videos
Examples of use
Data sheet

Price and rebate
	20 pcs.	0,28 EUR ea.
from	60 pcs.	0,24 EUR ea.
from	140 pcs.	0,22 EUR ea.
from	360 pcs.	0,19 EUR ea.
Ask for a rebate from 1 700 pcs.
incl. 21% VAT plus shipping

5,60 EUR

incl. 21% VAT plus shipping

promptly deliverable

Available: 691 040 pieces

Delivery time: 2 - 7 business days

Quant.

Description

Top seller: More than 12 000 000 sold!
The convenient solution, if you want to glue on the magnet S-10-01-N. This is a flat disc magnet (10 mm diameter, 1 mm thick) with one self-adhesive side. Simply remove the film and stick it on. With this magnet, any surface quickly turns into a notice board and photos can be hung anywhere without causing puncture marks. These self-adhesive magnets are shipped in pairs. For example, if you order 20 pieces, you will receive 10 magnet pairs.

Please note: Self-adhesive magnets need to be placed, pressed and dried on suitable surfaces to adhere properly. Please read our FAQ about self-adhesive magnets.

Technical data

Article ID	S-10-01-STIC
EAN	7640155437547
Material	NdFeB
Shape	Disc self-adhesive
Diameter	10 mm
Height	1 mm
Tolerance	+/- 0,1 mm
Direction of magnetisation	axial (parallel to height)
Coating	Nickel-plated (Ni-Cu-Ni)
Magnetisation	N35
Strength	approx. 540 g (approx. 5,3 N)
Max. working temperature	80°C (possibly lower)
Adhesive	3M, No. 467MP
Shelf life adhesive	12 months (approx.)
Weight	0,6 g
Adhesive data sheet
PDF data sheet

Videos

Additional features and tips

A plastic strip separates the magnetic pairs and makes the handling easier.

The magnets will be delivered in pairs, meaning one half with a self-adhesive south pole and one half with a self-adhesive north pole.

One sales unit contains a strip of 10 pairs, meaning 20 single magnets. If you order 20 pieces in the shop, you receive a strip like the one in the picture.
Please note that the magnets are in alternative order, so they are not attracting each other. That means, north and south pole alternate if you peel off the magnets one after the other from the strip. This is only relevant when it's important which magnetic pole to glue on.

Self-adhesive magnets need to be placed, pressed and dried on suitable surfaces to adhere properly. Please read our FAQ about self-adhesive magnets.

What can you do with these self-adhesive magnets?
Let's say, you want to close a mailing or an invitation in an original way.

Glue one magnet onto one side.

Place the second magnet with the protective film on it - the two magnets fit exactly on top of each other.

The same principle applies of course to the closing of a cardboard box, an invitation card, etc.

Please note that you cannot send such a mailing directly through the postal service, because the magnets would stick to all sorts of metallic surfaces. Even a paper envelope does not do much good - the magnets should be several millimeters apart from the surrounding packaging in order to avoid problems during transport.

If the box will be in use over a longer period of time, it is recommended not to use adhesive magnets and to incorporate these directly into the packaging, like in the example above. Here, the magnets are glued between the cardboard and a layer of paper. This way it can be avoided that the magnets splinter or break after some time. Neodymium magnets are brittle and therefore not suitable for repeated clashing.

The used adhesive is a 3M adhesive (type 467MP). The English data sheet for the adhesive can be found here:
3M data sheet

It sticks!

Making magnetic name tags that are easy on your fabrics is only one way to use this disc magnet.

A selection of our self-adhesive magnets: From 1 mm thin to 3 kg adhesive force - with or without foam, round or angular - the appropriate self-adhesive magnet for your every need.